Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide Rev 1.3
For Training Purposes Only 11/19/2012
Device Management
Improvements
Device Statistics Information
Data elements that are part of MPS Enabler Printer
Statistics are to be represented via SNMP protocol.
Devices store information related to duplex, n-up, low
power, etc
Installed Features
(including eSF Apps)
A comprehensive group within the Enterprise MIB that
represents all installed options and features (including
scanner if MFP). Included in this list should be any card
readers, DLE hardware, options, trays and outputs,
duplex, ram, flash, hard drives, cards, USB ports,
parallel ports, etc. and reported back via SNMP for
inventory and configuration reporting/support.
Tracks all jobs that are sent to machine or initiated at the
machine. Provides the who, what, when, and on what
kind of media, mono or color.
Customizable Billing Reports
Job logs can be downloaded for customizable billing
reports. Job Logs can be retrieved through a variety of
open architecture methods.
ADF Scan Length Enhancement
Scan length through the ADF is increased to 25" linear.
Virtual Configuration Center
Ability to customize devices at the reseller or customer.
Consistent messaging between products for different
error codes and issues. Non model specific error codes
for easier lookup and management.
Additional Sustainability Statistics
Job logs Utilize firmware tracking information for page
count, cartridge usage type and count, duplex and n-up
to track "green" print behavior
Enhanced Power
Management
Front panel sleep button to place device in a lower
power sleep mode.
Enters Sleep by
- Inactivity Timeout
- Sleep Button Press
Exits Sleep by
- Receive a Job
- Cover Open/Close/Tray Insert
- Front USB insert
- Touch screen or button press
If the printer posts an error, the user must do something
to clear it or it will not continue.
To Next Page
Loading...
