What does 'Cartridge very low [88.xy]' mean for Lexmark MS810?
If your Lexmark printer displays the message 'Cartridge very low [88.xy]', it indicates that you may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.
What to do if my Lexmark Printer displays 'Empty the hole punch box'?
If your Lexmark printer displays the message 'Empty the hole punch box', empty the hole punch box. Then, reinsert the hole punch box into the finisher, and touch Continue to clear the message.
How to fix incorrect paper size error on Lexmark MS810?
To resolve the 'Incorrect paper size, open [paper source]' error on your Lexmark Printer, load the correct size of paper in the paper source. You can also select Continue on the printer control panel to clear the message and print using a different paper source. Check the length and width guides of the paper source to ensure the paper is loaded properly. Also, verify that the correct paper size and type are specified in the Printing Preferences or in the Print dialog, as well as in the Paper menu on the printer control panel. Ensure that the paper size is correctly set. If none of these steps work, cancel the print job.
How to fix unsupported option in slot [x] on Lexmark MS810 Printer?
Turn off the printer, unplug the power cord from the wall outlet, remove the unsupported option card from the printer controller board, and then replace it with a supported card.
How to fix replace cartridge, printer region mismatch on Lexmark MS810?
Install a toner cartridge that matches the region number of the printer.
How to fix paper changes needed on Lexmark Printer?
Select Use current supplies on the printer control panel to clear the message and continue printing, or cancel the current print job.
How to fix check tray connection on Lexmark Printer?
To address the 'Check tray [x] connection' message on your Lexmark printer, try the following: 1. Turn the printer off, then turn it back on. 2. If that doesn't work, turn off the printer, unplug the power cord from the electrical outlet, remove the specified tray, reattach the tray, connect the power cord to a properly grounded electrical outlet, and then turn the printer back on. 3. You can also select Continue on the printer control panel.
How to fix memory full error on Lexmark MS810?
If your Lexmark Printer displays a 'Memory full' message, clear the message by selecting Cancel job from the printer control panel. You can also install additional printer memory.
What to do if Lexmark Printer says maintenance kit low?
If your Lexmark printer displays 'Maintenance kit low', you may need to order a maintenance kit. If necessary, select Continue to clear the message and continue printing.
How to resolve cartridge, imaging unit mismatch on Lexmark Printer?
To resolve a 'Cartridge, imaging unit mismatch' error on your Lexmark Printer, use only a supported toner cartridge and imaging unit.
Explains how to find instructions for your printer using the table of contents or search function.
Explains how to find instructions for your printer using the table of contents or search function.
Details the process of installing various internal hardware components like memory cards and hard disks.
Covers the order of installation for hardware options and specific instructions for installing optional trays.
Explains common error messages related to cartridges, paper, and disk issues.
Addresses issues like jagged characters, clipped pages, uneven density, and streaked lines.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 55 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 300, 000 pages |
| Processor Speed | 800 MHz |
| Standard Memory | 512 MB |
| Maximum Memory | 2560 MB |
| Connectivity | USB, Ethernet |
| Duplex Printing | Standard |
| Media Types Supported | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| Maximum Paper Size | Legal |
| Operating System Compatibility | Windows, Mac, Linux |
| Input Capacity | 650 pages (Standard) |
| Maximum Paper Input | 4400 pages |
To Next Page
