What to do when Lexmark Printer says 'Change [paper source] to [custom string]'?
When your Lexmark printer displays the message 'Change [paper source] to [custom string]', load the correct paper size and type in the tray. Verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper. Alternatively, you can cancel the print job.
What to do if my Lexmark MS810 displays 'Complex page, some data may not have printed [39]'?
If your Lexmark printer displays the message 'Complex page, some data may not have printed [39]', you have a few options: * From the printer control panel, select Continue to ignore the message and continue printing. * Cancel the current print job. * Install additional printer memory.
What does 'Maintenance kit low [80.xy]' mean on my Lexmark Printer?
If your Lexmark printer displays 'Maintenance kit low [80.xy]' message, you may need to order a maintenance kit. For more information, contact customer support. If necessary, select Continue to clear the message and continue printing.
How to fix load paper source with custom string paper orientation on Lexmark Printer?
To resolve the 'Load [paper source] with [custom string] [paper orientation]' message on your Lexmark printer, load the tray or feeder with the correct size and type of paper. To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel.
How to fix install tray [x] message on Lexmark Printer?
To resolve the 'Install Tray [x]' message on your Lexmark printer, install the specified tray: Turn off the printer, unplug the power cord from the electrical outlet, install the specified tray, connect the power cord to a properly grounded electrical outlet, and turn the printer back on. You can also cancel the print job or reset the active bin.
What to do if Lexmark Printer says insufficient memory to collate job?
If your Lexmark printer displays 'Insufficient memory to collate job', select Continue from the printer control panel to print the part of the job already stored and begin collating the rest of the print job. You can also cancel the current print job.
How to fix unsupported disk on Lexmark MS810?
Remove the unsupported disk, and then install a supported one.
How to fix replace missing fuser on Lexmark MS810?
Install the missing fuser.
How to resolve 'Check tray [x] connection' error on Lexmark MS810 Printer?
To resolve a 'Check tray [x] connection' error on your Lexmark printer, follow these steps: 1. Turn off the printer, and then turn it back on. 2. If the error appears again: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the specified tray. * Reattach the tray. * Connect the power cord to a properly grounded electrical outlet. * Turn the printer back on. 3. If the error persists: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the tray. * Contact customer support. 4. To clear the message and resume the job, select Continue on the printer control panel.
What to do if my Lexmark MS810 displays 'Close door or insert cartridge'?
If your Lexmark printer displays the message 'Close door or insert cartridge', it means the toner cartridge is either missing or not installed correctly. To resolve this, insert the cartridge properly, and then ensure all doors and covers are securely closed.
Explains how to find instructions for your printer using the table of contents or search function.
Explains how to find instructions for your printer using the table of contents or search function.
Details the process of installing various internal hardware components like memory cards and hard disks.
Covers the order of installation for hardware options and specific instructions for installing optional trays.
Explains common error messages related to cartridges, paper, and disk issues.
Addresses issues like jagged characters, clipped pages, uneven density, and streaked lines.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 55 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 300, 000 pages |
| Processor Speed | 800 MHz |
| Standard Memory | 512 MB |
| Maximum Memory | 2560 MB |
| Connectivity | USB, Ethernet |
| Duplex Printing | Standard |
| Media Types Supported | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| Maximum Paper Size | Legal |
| Operating System Compatibility | Windows, Mac, Linux |
| Input Capacity | 650 pages (Standard) |
| Maximum Paper Input | 4400 pages |
To Next Page
