107
Set up the optional finisher
11
Push the finisher flush against
the printer to fully insert the
guide rail.
12
Pull the finisher away from the
printer until the guide rail
clicks
into place.
The line on the label closest to the
printer should be aligned with the
edge of the bracket on the
2500-sheet drawer.
CAUTION!
Proper installation of the
guide rail prevents you from pulling the
finisher too far away from the printer.
After you install the transport unit on top
of the printer (see page 108), the locking
guide rail prevents the transport unit
from falling between the printer and the
finisher, possibly causing personal injury.
To Next Page
Loading...
