EasyManua.ls Logo

Lexmark Optra W810 - Securing the Stabilizing Bar

Lexmark Optra W810
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
75
Set up the optional mailbox
Securing the
stabilizing bar
CAUTION!
The mailbox weighs 28 kg
(62 lb) and requires two people to lift it
safely.
1
Have someone help you stand
the mailbox upright.
2
Use the cutout on the card-
board panel to pull the
cardboard off the mailbox.
3
Locate the stabilizing bar on
the bottom of the mailbox.
One end of the stabilizing bar has
a tab with a screw hole in it, and
the other end has a roller on it.
4
Slide the stabilizing bar under
the mailbox until the end that
has a screw hole in it is flush
with the mailbox.
The end that has a roller on it
extends all the way out the oppo-
site side.
5
Secure the stabilizing bar to the
bottom of the mailbox with a
wing nut.

Table of Contents

Other manuals for Lexmark Optra W810

Related product manuals