55
Install memory and option cards
9
Repeat steps 3 through 8 to
install another option card.
10
Choose the first task in the fol-
lowing table that identifies
something you have left to do.
Then go to the page listed.
Installing a hard disk
Two hard disk options are available from
Lexmark:
•
A hard disk with a ribbon cable
already installed.
•
An adapter ribbon cable that you
can use to install any other Lex-
mark or third-party hard disk
meeting the following criteria:
— 2.5-inch platter
— ATA-2 (IDE) interface
— Maximum thickness of 13 mm
(0.51 in.)
What do I do next?
Task Go to page …
1 Install a hard disk. 55
2 Reinstall the system board access cover. 59
To Next Page
Loading...
