46
Install memory and option cards
Accessing the printer
system board
Before installing these options, you must
remove the system board access cover
and the metal shield.
CAUTION!
If you are installing mem-
ory or option cards sometime after
setting up the printer, turn the printer off
and unplug the power cord before
continuing.
Warning!
If you have an optional mail-
box or finisher already installed, refer to
the
User’s Reference
for information
about removing the transport unit from
the top of the printer.
1
Lift the system board access
cover off the printer and lay it
aside.
To Next Page
Loading...
