Lexmark Optra W810 - Appletalk

163
Set up network addresses
8
Configure the MarkNet print server:
a
Set a unique NetWare login name.
This is the name the print server uses to log in to the
NetWare server.
b
Enable the MarkNet port.
Note:
For information about
choosing PSERVER or
RPRINTER mode, look on the
Drivers, MarkVision and Utilities
CD. Click
View Documentation
and then click
MarkNet Print
Servers
.
c
Select PSERVER mode.
-- If you want to manage NDS queues, you must specify the
NDS tree and context where the print server is defined.
You also need to create or select queues to be serviced.
-- If you want to manage bindery queues, you must first
specify the file servers. Afterward, you must create or
select queues to be serviced.
d
If prompted to reset the print server, select
Yes
to imme-
diately begin servicing the queues.
AppleTalk
Your MarkNet print server works automatically with AppleTalk net-
works. You simply connect the power and the network cables, and
you’re up and running.
Note:
MarkVision for Macin-
tosh is on the
Drivers,
MarkVision and Utilities
CD.
However, if you would like to use a zone and printer name different
from the defaults, you can use MarkVision for Macintosh to change
these settings.