Lexmark Optra W810 - Step 2: Unpack the Printer

6
Unpack the printer
Step 2: Unpack the printer
You’ve chosen an appropriate location
for your Optra W810. Now you’re ready
to unpack the printer and prepare to set
it up.
1
Make sure you have the follow-
ing items:
— Printer
— Photoconductor cartridge
— Toner cartridge
— 500-sheet drawer
—
Setup Guide
— User’s Reference
— Drivers, MarkVision and Utili-
ties
CD
—Power cord
— Printer pocket
— Operator panel overlay
(non-English only)
You will also need a Phillips
screwdriver to perform many of
the procedures outlined in this
Setup Guide . We recommend
that you use a screwdriver with
a magnetized tip.
If any items listed above are miss-
ing or damaged, refer to the
registration card for the desig-
nated Lexmark support phone
number for your country.
Printer manuals
Photoconductor
cartridge (in box)
Printer
CD
Power cord
500-sheet drawer
(in box)
Toner cartridge
(in box)
Printer
pocket
Operator panel
overlay
(non-English only)