Lexmark Optra W810 - Installing Option Cards

52
Install memory and option cards
Installing option cards
Your printer has two connectors that sup-
port the following option cards:
Note:
The Optra W810n and W810dn
printer models ship with an Ethernet
print server already installed.
•
Tri-port interface card
•
Parallel/USB interface card
•
MarkNet internal print server
The Optra W810 has a separate connec-
tor for a hard disk. See “Installing a hard
disk” on page 55. However, you can use
the disk adapter card supported by some
other Lexmark laser printers to install a
hard disk in one of the option card con-
nectors,
if you do not install a disk in the
unique disk connector
.
Install a MarkNet internal print
server to add an Ethernet or
Token-Ring port for connecting
your printer to a local area
network (LAN).
Install a parallel/USB interface
card to add a USB (Universal
Serial Bus) port and a second
parallel port.
Install a tri-port interface card
to add LocalTalk, serial, and
infrared ports.
Install an internal print server
with modem support (for
sending or receiving fax data)
as well as a SCSI port, in
addition to the Ethernet port.