62
Install the duplex option
Step 7: Install the
duplex option
Note:
The Optra W810
dn
model ships
with duplexing hardware already
installed.
The Optra W810 printer supports a
Duplex Option that lets you print on both
sides of a sheet of paper.
The duplex option consists of two
components:
•
The
manual feed unit,
which you
must install first
•
The
duplex unit
You will remove several covers from the
printer while you’re installing the duplex
option. Store the covers and screws in a
safe place in case you decide to remove
the duplex option from the printer some-
time in the future.
To Next Page
Loading...
