54
Install memory and option cards
Warning!
Option cards are easily
damaged by static electricity. Touch
something metal on the printer before
you touch an option card.
4
Unpack the option card.
Save the packing materials.
5
Align the connector on the
option card with the connector
on the system board.
The cable connectors on the side
of the option card must fit through
the opening in the back of the
printer.
6
Push the option card firmly into
the option card connector.
7
Insert the two screws saved
from the metal plate (or the
extra screws shipped with the
option card) into the holes on
either side of the connector
opening.
8
Tighten the screws to secure
the card to the system board.
Rear view
To Next Page
Loading...
