74
Set up the optional mailbox
CAUTION!
If you are installing the
mailbox sometime after initial printer
setup, turn the printer off and unplug the
power cord before continuing.
To set up the mailbox:
1
Remove the mailbox and all
other items from their packing
materials.
Remove any plastic wrapping,
shipping tape, and protective
foam. Leave the screws and mag-
netic accessories taped to the
transport unit.
Save the carton and packing
materials in case you need to
repack the mailbox.
2
Make sure you have the follow-
ing items:
— Mailbox
— 10 output bins
— Transport unit
— Support shelf
— Guide rail
— Guide rail bracket
— Set pin
— Magnetic bracket
— 2 screws
— 1 wing nut
If any items are missing or dam-
aged, refer to the registration card
for the designated Lexmark sup-
port phone number for your
country.
Mailbox
Output bins
(box of 5)
Output bins
(box of 5)
Guide rail
bracket,
set pin,
magnetic
bracket,
screws,
and wing
nut
Guide rail
Support shelf
Transport unit
To Next Page
Loading...
