143
Attach cables
f
Press
Select
.
The printer resets. You are now ready to receive faxes.
Refer to the
Complete Printer Reference
for information
about changing the fax communication settings, such as
baud and parity.
7
Continue with Step 12: “Verify setup” on page 145.
Note:
Do not attempt to con-
figure the serial port for multiple
uses with an A-B switch.
To disable the fax modem and restore the printer serial port to normal
use:
1
From the printer operator panel:
a
Press the
<Menu
button to enter the menus.
b
Continue to press
<Menu
until you see
FAX MENU
.
c
Press the
Select
button.
Fax Port
appears on the second line of the display.
d
Press
Select
again.
e
Press
Menu>
until
Disabled
appears on the second line
of the display.
f
Press
Select
.
The printer resets.
2
Turn the modem off.
3
Turn the printer off.
4
Disconnect the modem cable from the printer serial port.
5
Turn the printer on.
6
Continue with Step 12: “Verify setup” on page 145.
To Next Page
Loading...
