151
Verify setup
1
From the printer operator panel, press the
Menu>
button to
enter the menus.
PAPER MENU
appears on the second line of the display.
2
Press the
Select
button to open the Paper Menu.
3
Press and release
Menu>
until
CONFIGURE BINS
appears on
the second line.
4
Press
Select
.
Mailbox
appears on the second line of the display.
5
Press Menu> or <Menu to scroll through the list of avail-
able configuration modes.
6
When the correct configuration mode appears on the sec-
ond line of the display, press Select again to save the
mode as the bin configuration default.
7
Press the
Go
button to return the printer to the Ready
state.
Refer to the
Complete Printer Reference
if you need more information
about changing printer settings from the menus.
Continue with Step 13: “Load MarkVision and drivers”
on page 152.
To Next Page
Loading...
