156
Set up network addresses
Note:
The UAA is preset at the
factory. However, you can over-
ride it with an optional locally
administered address (LAA) if
you want some particular physi-
cal address for the print server.
6
Look for the UAA under the Network heading on the setup
page.
The UAA is a 12-digit number. The left column shows the
address in MSB form and the right column shows the address
in canonical form.
7
Save the network setup page to use later.
8
Turn to the appropriate section for instructions on config-
uring your print server.
What do I do next?
Network environment Go to page …
TCP/IP 157
Novell NetWare 162
AppleTalk 163
OS/2 Warp server 165
To Next Page
Loading...
