Lexmark Optra W810 - Page 172

160
Set up network addresses
3
Select
TCP/IP
.
Note:
For details on installing
the necessary software, launch
the
Drivers, MarkVision and Util-
ities
CD. Click
View Documenta-
tion
and then click
MarkNet Print
Servers
.
4
Install the TCP/IP software component on the server that
contains the print queue.
This software is necessary to establish the link between the
MarkNet print server and the queue.
5
Set up a print queue on the server by creating a printer
object:
a
Click
Start
,
Settings
,
Printers
,
Add Printer
.
a
When prompted, select
My Computer
(not
Network Printer
Server
).
b
Click
Add Port
.
c
Select
Lexmark Network Port
, and then click
New Port
. Fol-
low the instructions on the screen.
d
Share the queue.
6
Set up your Windows 95, Windows 98, or Windows NT cli-
ents in the usual way. (Hint: Click
Start
,
Settings
,
Printers
,
Add Printer
.)
Point-to-point printing (LexIP)
Note:
These are instructions
are for Windows 95/98 worksta-
tions. Instructions for
Windows NT workstations are
on the
Drivers, MarkVision and
Utilities
CD.
You can print from any Windows 95, Windows 98, or Windows NT
workstation directly to a Lexmark printer located anywhere on the
IP network. No server is required.
1
Launch the
Drivers, MarkVision and Utilities
CD.
2
Choose custom install to add network support.
3
Select
TCP/IP
.
4
Install the TCP/IP software component on the workstation.
5
Create a printer object on the workstation:
a
Click
Start
,
Settings
,
Printers
,
Add Printer
.
b
When prompted, select
Local Printer
(not
Network
).