50
Install memory and option cards
5
Hold the memory card with the
connection points pointing
toward the memory connector
on the system board, as shown.
6
Align the notches on the bot-
tom of the card with the
notches on the connector.
7
Push the memory card firmly
into the connector until the
latches on either end of the
connector
snap
into place.
It may require some force to fully
seat the card.
Make sure each latch fits over the
notch on the end of the card, as
shown.
8
Repeat steps 4 through 7 to
install other memory cards.
Notch
Notch
To Next Page
Loading...
