What is an SSID?
A Service Set Identifier (SSID) is the name that identifies a wireless network. All devices on the network must know the
SSID of the wireless network, or they will not be able to communicate with each other. Usually, the wireless network
broadcasts the SSID to allow wireless devices in the area to connect to it. Sometimes, the SSID is not broadcast for
security reasons.
If the SSID of your wireless network is not broadcast, then it cannot be detected automatically and will not show up in
the list of available wireless networks. You must enter the network information manually in this situation.
An SSID can contain up to 32 alphanumeric characters. Alphanumeric characters are a combination of alphabetic (letters
A to Z) and numeric (numbers 0 to 9) characters.
Where do I find my SSID?
•
View the settings on the access point (wireless router).
Most access points have a built‑in Web server that can be accessed using a Web browser.
• Check your computer to see if a program was installed with your wireless network adapter.
Many network adapters provide a software application that allows you to view the wireless settings of your
computer, including your SSID.
If you are unable to locate your SSID using either of these methods, then contact your system support person.
What is a network?
A network is a collection of devices such as computers, printers, Ethernet hubs, access points, and routers connected
together for communication through cables or through a wireless connection. A network can be wired, wireless, or
designed to have both wired and wireless devices.
How do I find out what type of security my network is using?
•
Contact your system support person.
The person who set up your network usually keeps your wireless information.
• See the documentation that came with your access point (wireless router).
•
Check the characters of the password that you use to access your wireless network.
If you are not using a password, then choose None or No Security.
Characters Security type
Exactly 10 or 26 hexadecimal characters
or
Exactly 5 or 13 ASCII characters
WEP
Exactly 64 hexadecimal characters
or
From 8 to 63 ASCII characters
WPA or WPA2
Notes:
– Hexadecimal characters are A–F, a–f, and 0–9.
Networking 116
To Next Page
Loading...
Need help?
General