Replacing ink cartridges
Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately
after removing the old ones, or the ink remaining in the printhead nozzles may dry out.
1 Turn on your printer.
2
Open the ink cartridge access door.
Warning—Potential Damage: Do not extend the ink cartridge access door beyond 90 degrees when opening to
prevent it from breaking.
3 Press the release tab, and then remove the used ink cartridge or cartridges.
4
Insert each ink cartridge until it clicks into place.
Note:
Install the new ink cartridges immediately after removing them from the packaging to avoid exposing the
ink to air.
5 Close the ink cartridge access door.
Notes:
•
If Align Printer appears on the printer display, then touch Continue or press , depending on your
printer model.
Ordering and replacing supplies 14
To Next Page
Loading...
Need help?
General