Understanding printer messages
Alignment Problem
Try one or more of the following:
• Load only plain, unmarked paper when aligning the cartridges.
The printer will read any markings on used paper, which could cause the alignment error message to appear.
•
Touch Try Again.
•
Touch Cancel to clear the message.
Cannot Collate Job
Try one or more of the following:
• Touch Continue to print the pages that were saved in the printer memory, and then collate the remainder of the
print job.
•
Touch Cancel Printing to cancel the current print job.
Change [Paper Source] to [Custom String]
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch Paper Loaded, Continue to continue printing after loading the correct paper size and paper type in the default
paper tray.
•
Press to cancel the current job.
Change [Paper Source] to [Custom Type Name]
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch Paper Loaded, Continue to continue printing after loading the correct paper size and paper type in the default
paper tray.
•
Press to cancel the current job.
Change [Paper Source] to [Size] Paper
Try one or more of the following:
• Select the paper tray with the correct paper size or type.
• Touch Paper Loaded, Continue to continue printing after loading the correct paper size and paper type in the default
paper tray.
•
Press to cancel the current job.
Troubleshooting 141
To Next Page
Loading...
Need help?
General