Lexmark Pro915 - Page 11

Use the To
3 Memory card slot Insert a memory card.
4 PictBridge and USB port Connect a PictBridge-enabled digital camera, a USB Bluetooth adapter, or a
flash drive to the printer.
5 Paper exit tray Hold paper as it exits.
6 Paper tray (Tray 1) Load paper.
7 Paper stop Catch the paper as it exits.
8 Printer control panel Operate the printer.
9 ADF Scan, copy, or fax multiple‑page letter‑, legal‑, and A4‑size documents.
10
16
17
18
19
11
<
<
L
IN
E
E
X
T
12
13
14
15
Use the To
10 Scanner unit
• Access the ink cartridges and printhead.
• Remove paper jams.
11 Ink cartridge access area Install, replace, or remove ink cartridges.
12 Ethernet port Connect your printer to a computer, a local network, an external DSL, or a cable
modem.
13 USB port Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
14 LINE Port
Connect the printer to an active telephone line (through a standard wall jack, DSL filter,
or VoIP adapter) to send and receive faxes.
15 EXT Port
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer, and
if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
16 Power supply with port Connect the printer to a power source.
About your printer
11