Lexmark X466 User Manual

153Operations - TN3270E SETUP: TEST OPTIONS > SCS3270 Defaults
SCS3270
Defaults
This Test option restores the TN3270e SCS OPTIONS setting to
their factory default settings. Other printer emulation defaults are
unchanged.
The restored settings become active on the next SCS job.
The table below summarizes the differences between the US and
the Non-US factory default settings.
Option Value Comments
Do Not Restore * Do not restore any settings. This performs the same
action as if Back had been pressed in the operator
panel.
US-Default Restore the factory default TN3270e SCS settings
to US default settings.
Non-US-Default Restore the factory default TN3270e SCS settings
to non-US factory default settings.
Affected option US-Default Non-US-Default
Country Code (IDB Option 2)
English (US) English (UK)
Bottom Margin (IDB Option 109)
64 66
LPP (IDB Option 107)
64 66
Tray1 Paper Size (IDB Option 90)
Letter A4

Lexmark X466 Specifications

General

Print Resolution	1200 x 1200 dpi
Processor Speed	400 MHz
Fax Speed	33.6 Kbps
Functions	Print, Copy, Scan, Fax
Operating System Compatibility	Windows, Mac, Linux
Print Technology	Laser
Duplex Printing	Yes
Connectivity	USB, Ethernet
Paper Handling	250-sheet input tray, 50-sheet multipurpose tray
Scanner Type	Flatbed, ADF
Scan Resolution	1200 x 1200 dpi
Type	Multifunction
Paper Capacity	300 sheets
Maximum Paper Size	8.5 x 14 inches