To Next PageTo Next Page
How to fix blurred print on heavy stock with Lexmark X466 Printer?
If your Lexmark Printer produces blurred or out-of-focus prints on heavy stock, ensure the Paper Type setting is appropriate for your print material. Note that card stock heavier than 203 g/m2 may not yield acceptable print results. Additionally, printing five sheets, waiting about five seconds, and then printing five more sheets can remove accumulated toner.
What to do if Lexmark X466 Printer printing shows voids?
If your Lexmark Printer's printing shows voids, try changing the Paper Type setting to Plain Paper. Printing five sheets of paper, waiting approximately five seconds, and then printing five more sheets of paper may also resolve the issue.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Processor Speed | 400 MHz |
| Fax Speed | 33.6 Kbps |
| Functions | Print, Copy, Scan, Fax |
| Operating System Compatibility | Windows, Mac, Linux |
| Print Technology | Laser |
| Duplex Printing | Yes |
| Connectivity | USB, Ethernet |
| Paper Handling | 250-sheet input tray, 50-sheet multipurpose tray |
| Scanner Type | Flatbed, ADF |
| Scan Resolution | 1200 x 1200 dpi |
| Type | Multifunction |
| Paper Capacity | 300 sheets |
| Maximum Paper Size | 8.5 x 14 inches |
Explains SCS data reception via Telnet in a LAN, supporting TN3270E and TN5250E protocols over TCP/IP.
Lists printers and multifunction products (MFPs) that support the SCS/TNe emulation card.
Provides information on how to get support and update printer firmware.
Differentiates between SCS/TNe MENU settings and printer settings for job output.
Details how to access SCS/TNe settings via the printer operator panel menus.
Explains accessing SCS/TNe settings on an MFP's touch screen interface.
Explains the procedure for selecting and storing new option values via the operator panel.
Describes how to change text string settings using the operator panel menus.
Provides step-by-step instructions for changing settings via a browser interface.
Details mainframe software requirements and sample configurations for host setup.
Describes host configuration for SNA server printing with sample configurations.
Explains defining the printer for Telnet server and mapping display LUs.
Details setting up a Microsoft SNA Server for LU printer connection.
Steps to configure print server settings like NPA Mode and Job Timeout.
How to change or restore factory defaults for SCS3270.
Steps to select a different SCS country code.
Details how to configure a TN3270e print session.
Details host configuration by checking and setting system values.
Steps to configure print server settings like NPA Mode and Job Timeout.
How to select country-specific settings for SCS.
Details how to configure SCS/TNe emulation for AS/400 or iSeries.
Explains how SCS jobs can be canceled at the printer or MFP.
Describes the procedure for canceling a job on a printer.
Details the process of canceling a job on a multifunction printer (MFP).
Describes how to reset and reconnect SCS/TNe emulation sessions.
How to enable and use the trace function for troubleshooting.
Lists and describes options within the NETWORK SETUP menu.
Lists and describes options within the SCS OPTIONS menu.
Lists and describes options within the TEST OPTIONS menu.
Lists and describes options for each connection.
Lists and describes options within the SCS OPTIONS menu.
Describes managing IDB configuration files via PC screen and FTP.
Details the Power On initialization sequence and events.
Describes the SCS/TNe Emulation option and its capabilities.
Lists compatible IBM printer emulations and print servers.
Provides a table of all ASCII printable characters.
Steps to print an IDB report from the operator panel.
Explains how SCS/TNe Emulation rotates printout based on menu settings.
Provides calculation details for page format based on FCB information.
Explains the programmable font table and conversion between IBM font IDs and internal fonts.
