Printing envelopes
1 Load envelopes. For more information, see “Loading various paper types” on page 5.
Notes:
• Do not load envelopes with holes, perforations, cutouts, deep embossing, metal clasps, metal folding bars,
string ties, or exposed flap adhesive.
• Make sure the print side of the envelopes faces you.
2 Customize the settings as needed in the Page Setup dialog.
a With a document open, click File Page Setup.
b From the “Format for” pop-up menu, choose 5400 Series.
c From the Paper Size pop-up menu, choose the envelope size loaded.
d Choose an orientation.
Notes:
• Most envelopes use landscape orientation.
• Make sure the same orientation is also selected in the software application.
e Click OK.
3 Customize the settings as needed in the Print dialog.
a From the software application, click File Print.
b From the Printer pop-up menu, choose 5400 Series.
c Click Print.
Related topics:
• “Loading various paper types” on page 5
Printing iron-on transfers
1 Load iron-on transfers. For more information, see “Loading various paper types” on page 5.
2 Customize the settings as needed in the Page Setup dialog.
a With a document open, click File Page Setup.
b From the “Format for” pop-up menu, choose 5400 Series.
c From the Settings pop-up menu, choose Page Attributes.
d Choose a paper size.
e Choose an orientation.
f Click OK.
3 Customize the settings as needed in the Print dialog.
a From the software application, click File Print.
b From the Printer pop-up menu, choose 5400 Series.
c From the pop-up menu in the center, choose Quality & Media.
Printing
11
To Next Page
Loading...
