4 Connect the other telephone cord to a telephone, and then plug it into the EXT port of the printer.
Related topics:
• “Getting the printer ready to fax” on page 43
Connecting to an answering machine
Connect an answering machine to the printer to receive both incoming voice messages and faxes.
Note: Setup steps may vary depending on your country or region. For more information on connecting the printer
to telecommunications equipment, see “Using an RJ11 adapter” on page 44.
1 Make sure you have the following:
• A telephone
• An answering machine
• Three telephone cords
• A telephone wall jack
2 Connect one telephone cord into the LINE port of the printer, and then plug it into an active telephone wall
jack.
Faxing
48
To Next Page
Loading...
