19Understanding the Operator Panel: MFP Touch Screen
When you select an option, you will either scroll through the list of
values presented (“Selecting a New Value as a Setting” on
page 19), enter a number (“Changing a Numerical Setting” on
page 22), or enter a text string (“Changing a Text String” on
page 21).
Several examples of how to use the operator panel to select and
store new values are shown below. The section “Selecting a New
Value as a Setting” on page 19 shows all details, while the following
two sections discuss slight differences.
User-selected default settings remain in effect until you save new
settings or restore the factory defaults. All saved options become
active on the next host session.
Selecting a New Value as a
Setting
To select a new value
1 Navigate to the SCS/TNe MENU as explained in “MFP Touch
Screen” on page 18.
2 For this example, touch SCS/TNe MENU.
3 Now you will see a list of menus. Touch or to scroll to
the desired item. In this example locate and touch TN3270E
SETUP.
To Next Page
Loading...
