58AS/400 and iSeries Installation Setup: Task 2 - Configuring a Print Server
3 Set the TCP/IP option values shown in the table below.
Select Menus > Network/Ports > TCP/IP. You will need to
contact your network administrator for several of the values.
You will need to contact your network administrator for
several of the values.
TCP/IP Option Value Description
Address Address available from your network
administrator.
Netmask Netmask for your network. Contact your network
administrator.
Gateway Address of the IP gateway. Contact your network
administrator.
Enable DHCP On or Off On, if you use a DHCP server.
Off, if you set the IP address another way.
To Next Page
Loading...
