167
2-2. Instrument cluster
2
When driving
Changing the display
Switches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the button will reset the
trip meter.
Instrument panel light control buttons
The brightness of the instrument panel lights can be adjusted.
Darker
Brighter
n The meters and display illuminate when
The “ENGINE START STOP” switch is in IGNITION ON mode.
NOTICE
n To prevent damage to the engine and its components
l Do not let the indicator needle of the tachometer enter the red zone, which indi-
cates the maximum engine speed.
l The engine may be overheating if the engine coolant temperature gauge is in the
r
ed zone (H). In this case, immediately stop the vehicle in a safe place, and check
the engine after it has cooled completely. (→P. 5 87)
To Next Page
Loading...
