193
2-3. Operating the lights and windshield wipers
2
When driving
n If the Automatic High Beam indicator flashes
It may indicate a malfunction in the system. Contact your Lexus dealer.
n Temporary lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
To lower the sensitivity, push and hold the “AUTO” button on the inside rear view
mirror for 15 to 20 seconds, and release. The indicator light on the inside rear view
mirror will flash to indicate that the sensitivity has been lowered.
When the “ENGINE START STOP” switch is turned off, the sensitivity will be
returned to its normal level.
n Customization that can be configured at your Lexus dealer
The Automatic High Beam can be turned off.
To Next Page
Loading...
