194
2-3. Operating the lights and windshield wipers
NOTICE
n Notes when using the Automatic High Beam system
l Do not touch the camera sensor.
l Do not subject the inside rear view mirror or the camera sensor to a strong
impact.
l Do not disassemble the camera sensor.
l Do not spill liquid onto the inside rear view mirror or the camera sensor.
l Do not apply window tinting or stickers to the camera sensor or the area of wind-
shield near the camera sensor.
l Do not place items on the dashboard. There is a possibility that the camera sensor
will mistake items reflected in the windshield for streetlights, the headlights of
other vehicles, etc.
l Do not install a parking tag or any other accessories near or around the inside
rear view mirror and the camera sensor.
l Do not overload the vehicle.
l Do not modify the vehicle.
l Do not replace windshield with non-genuine windshield.
Contact your Lexus dealer.
Observe the following to ensure that the
Automatic High Beam functions correctly.
To Next Page
Loading...
