434
3-7. Other interior features
n Deviation calibration
Stop the vehicle.
Press and hold “AUTO”.
A number (1 to 15) appears on the
compass display.
Referring to the map above, press “AUTO” to select the number
of the zone where you are in.
If the direction is displayed for several seconds after adjustment, the
calibration is complete.
n Circling calibration
If “C” appears on the display, drive
the vehicle at 5 mph (8 km/h) or
less in a circle until a direction is
displayed.
If there is not enough space to
drive in a circle, drive around the
block until a direction is displayed.
STEP 1
STEP 2
STEP 3
To Next Page
Loading...
