189
2-3. Operating the lights and windshield wipers
2
When driving
Automatic High Beam
∗
∗: I
f equipped
The Automatic High Beam uses an in-vehicle camera sensor to assess the
brightness of streetlights, the lights of oncoming and preceding vehicles,
etc., and automatically turns high beam on or off as necessary.
n Activating the Automatic High Beam system
Head light switch in “
AUTO”
position.
Push the lever away from you.
The Automatic High Beam indi-
cator will come on when the
headlights are turned on auto-
matically to indicate that the sys-
tem is active.
STEP 1
STEP 2
To Next Page
Loading...
