129
3-3. Adjusting the seats
LS500h_OM_OM50F42U_(U)
3
Before driving
Lumbar support adjustment switch
Seat cushion length adjustment
switch (if equipped)
■ Center Display
1 Press the seat switch.
2 Using the Remote Touch pad,
select “Driver Seat Adjustment” or
“Passenger Seat Adjustment”.
3 Select the button for the desired
adjustment.
Head restraint adjustment
(→P.144)
Shoulder bolster adjustment (if
equipped)
Lumbar support adjustment
Pelvic support adjustment
Seatback side bolster adjustment (if
equipped)
Seat cushion side bolster adjust-
ment (if equipped)
Hip support adjustment (if
equipped)
4 Perform adjustment using the dis-
played buttons.
The seat will move while a button is
selected.
■ When adjusting the front seats
While adjusting a front seat, to avoid con-
tact with the ceiling, instrument panel or
rear seats, the operation of the seat may be
restricted or parts of the seat other than that
being adjusted may move.
■ Operation after the power switch is
turned off
After a certain time elapses after the power
switch is turned off, the following parts of
the front seats will move to their neutral
positions.
● Shoulder bolster (if equipped)
● Lumbar support
● Pelvic support
● Seatback side bolster (if equipped)
● Seat cushion side bolster (if equipped)
● Hip support (if equipped)
■ Automatic angle adjustment of the rear
displays (if equipped)
When a seat is adjusted, the angle of the
rear display will be adjusted automatically
to maintain an optimal viewing angle for the
rear display from the rear seat.
■ Pre-collision seatbacks for the passen-
ger seats
→P.210, 220
■ Customization
Some functions can be customized.
(→P.481)
To Next Page
Loading...
