Lexus LS500 - Electric Motor (Traction Motor) Data; Hybrid Battery (Traction Battery) Data; Lubrication System Data

462
8-1. Specifications
LS500h_OM_OM50F42U_(U)
■ Oil capacity (Drain and refill [Ref-
erence
*
])
*
: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. Warm up the engine and turn
off the hybrid system, wait more than 5
minutes, and check the oil level on the
dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil”
or equivalent to satisfy the following
grade and viscosity.
Oil grade: ILSAC GF-5 multigrade
engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good starting
in cold weather.
If SAE 0W-20 is not available, SAE
5W-20 oil may be used. However, it
must be replaced with SAE 0W-20 at
the next oil change.
Recommended viscosity (SAE):
Electric motor (traction motor)
Type Permanent magnet synchronous motor
Maximum output 131.9 kW
Maximum torque 221.3 ft•lbf (300 N•m, 30.6 kgf•m)
Hybrid battery (traction battery)
Type Lithium-ion battery
Voltage 3.7 V/cell
Capacity 3.6 Ah
Quantity 84 cells
Overall voltage 310.8 V
Lubrication system
With filter
 2WD models
6.0 qt. (5.7 L, 5.0 Imp. qt.)
 AWD models
7.1 qt. (6.7 L, 5.9 Imp. qt.)
Without fil-
ter
 2WD models
5.8 qt. (5.5 L, 4.8 Imp. qt.)
 AWD models
6.8 qt. (6.4 L, 5.6 Imp. qt.)