Lexus LS500 - Changing Setting of the Access Mode Control and Parking Height Control; Disabling the Vehicle Height Control Function

301
4-5. Using the driving support systems
LS500h_OM_OM50F42U_(U)
4
Driving
and decreased using the vehicle height
adjustment switch, etc., the system may not
operate temporarily.
The following settings can be changed
using the meter control switches for
the easy access to the vehicle. (→P.87)
1 Press or to select .
2 Press or to select “Vehicle
Settings” and then press .
3 Press or to select
and then press .
4 Press or to select “Access
Mode” or “Select Parking Height”
and then press .
These settings are memorized even if the
power switch is turned off.
 Access mode control (“Access
Mode”)
When access mode control is enabled, the
vehicle height will increase automatically in
the following situations:
• When the doors are unlocked using the
smart access system with push-button
start
• When the doors are unlocked using the
wireless remote control and then a door
is opened.
The vehicle height will increase by approxi-
mately 1.2 in. (30 mm) from its normal
position.
The vehicle height may not increase, if the
vehicle height already reaches the
selected height.
The vehicle will return to its normal height
when the vehicle speed reaches approxi-
mately 12 mph (20 km/h).
When access mode control is disabled, the
parking height control will also be disabled.
 Parking height control (“Select
Parking Height”)
When “High” is selected, the vehicle height
will automatically increase when the P shift
position is selected and a door is opened.
The vehicle height will increase by approxi-
mately 0.4 in. (10 mm) from its normal
position.
The vehicle height may not increase, if the
vehicle height already reaches the
selected height.
The vehicle will return to its normal height
when the vehicle speed reaches approxi-
mately 12 mph (20 km/h).
■ When the vehicle height has been
increased by the access mode control
function
Press the vehicle height adjustment switch
with the power switch in any mode to return
the vehicle to its previous vehicle height.
■ Situations in which the access mode
control function will not operate
The access mode control function will not
operate if the vehicle is not parked on a
level road surface.
The vehicle height control functions
can be disabled using the meter con-
trol switches. (→P.87)
1 Press or to select .
Changing setting of the access
mode control and parking height
control
Disabling the vehicle height con-
trol functions