406
6-3. Do-it-yourself maintenance
LS500h_OM_OM50F42U_(U)
1 Chock the tires.
2 Slightly loosen the wheel nuts (one
turn).
3 Turn the tire jack portion by
hand until the notch of the jack is in
contact with the jack point.
The jack point guides are located under
the rocker panel. They indicate the jack
point positions.
4 Raise the vehicle until the tire is
slightly raised off the ground.
5 Remove all the wheel nuts and the
tire.
When resting the tire on the ground, place
the tire so that the wheel design faces up to
avoid scratching the wheel surface.
Removing a tire
Tire
Wheel chock posi-
tions
Front
Left-hand side
Behind the rear
right-hand side tire
Right-hand
side
Behind the rear
left-hand side tire
Rear
Left-hand side
In front of the front
right-hand side tire
Right-hand
side
In front of the front
left-hand side tire
A