248
4-5. Using the driving support systems
LS500h_OM_OM50F42U_(U)
When the camera sensor recognizes a
sign or information of a sign is available
from the navigation system , the sign
will be displayed on the multi-informa-
tion display.
When the driving support system
information is selected, a maximum
of 3 signs can be displayed.
(→P.86)
When a tab other than the driving
support system information tab is
selected, only a recognized speed
limit sign or do not enter sign (when
notification is necessary) will be dis-
played. (→P.86)
If signs other than speed limit signs are rec-
ognized, they will be displayed in an over-
lapping stack under the current speed limit
sign.
The following types of road signs are recognized.
Non-official or recently introduced traffic signs may not be recognized.
Indication on the multi-informa-
tion display
Supported types of road signs
Type Multi-information display
Speed limit begins/ends
*
Do Not Enter
To Next Page
Loading...
