90
2-1. Instrument cluster
LS500h_OM_OM50F42U_(U)
will not be displayed on the multi-informa-
tion display. (→P.94)
Select to enable selection of an audio
source or track on the meter using the
meter control switches.
Select to display the operational status
of the following systems:
LTA (Lane Tracing Assist) (if
equipped) (→P.230)
LKA (Lane-Keeping Assist) (if
equipped) (→P.240)
Dynamic radar cruise control with
full-speed range (→P.250)
RSA (Road Sign Assist) (if
equipped) (→P.247)
■ Meter display settings that can be
changed
Language
Select to change the language displayed.
Units
Select to change the units of measure dis-
played.
Speedometer display (except F
SPORT models)
Select to set the display of the speedome-
ter to digital/analog/both digital and ana-
log.
Drive information 1/Drive informa-
tion 2
Select to select up to 2 items (→P.88) that
will be displayed on each Drive information
screen (Drive information 1 screen and
Drive information 2 screen) respectively.
Clock
Select to switch between 12-hour display
and 24-hour display.
Pop-up display
Select to enable/disable pop-up displays
for each relevant system.
Accent color
Select to change the accent color on the
screen, such as the cursor color.
Tachometer setting
Select to set the display of the Hybrid Sys-
tem Indicator or tachometer for each driv-
ing mode.
Rev indicator (F SPORT models)
• Select to enable/disable the rev indica-
tor.
• Select to set the engine speed at which
the rev indicator (amber) will begin to be
displayed.
Rev peak (F SPORT models)
Select to enable/disable the rev peak.
EV indicator
Select to enable/disable the EV indicator.
Default setting
Select to reset the meter display settings to
the default setting.
■ Vehicle functions and settings that
can be changed
→P.481
■ Suspension of the settings display
● Some settings cannot be changed while
Audio system-linked display
Driving support system informa-
tion display
Settings display
To Next Page
Loading...
