239
4-5. Using the driving support systems
LS500h_OM_OM50F42U_(U)
4
Driving
If a different warning message is displayed,
follow the instructions displayed on the
screen.
■ Customization
The following settings can be changed.
For how to change settings, refer to
→P.481
“Front Camera
Unavailable”
The operation condi-
tions of the camera
sensor (temperature,
etc.) are not met.
→When the opera-
tion conditions of the
camera sensor (tem-
perature, etc.) are met,
the LTA system will
become available. Turn
the LTA system off, wait
for a little while, and
then turn the LTA sys-
tem back on.
“LTA Unavailable”
The LTA system is tem-
porarily canceled due
to a malfunction in a
sensor other than the
camera sensor.
→Turn the LTA system
off and follow the
appropriate trouble-
shooting procedures
for the warning mes-
sage. Afterward, drive
the vehicle for a short
time, and then turn the
LTA system back on.
“LTA Unavailable
at Current
Speed”
The LTA system cannot
be used as the vehicle
speed is too high.
→Slow down.
Warning message Details/Actions Function Setting details
Lane departure
alert function
Adjust alert sensitivity
Adjust alert type
Steering assist
function
Turn steering wheel
assistance on and off
Vehicle sway
warning function
Turn function on and
off
Adjust alert sensitivity
Lane centering
function
Turn function on and
off
To Next Page
Loading...
