416
6-3. Do-it-yourself maintenance
LS500h_OM_OM50F42U_(U)
Type A
Normal fuse
Blown fuse
Type B
Normal fuse
Blown fuse
Type C
Normal fuse
Blown fuse
Type D
Normal fuse
Blown fuse
■ After a fuse is replaced
● When installing the lid, make sure that the
tab is installed securely.
● If the lights do not turn on even after the
fuse has been replaced, a bulb may need
replacement.
● If the replaced fuse blows again, have the
vehicle inspected by your Lexus dealer.
■ If there is an overload in a circuit
The fuses are designed to blow, protecting
the wiring harness from damage.
■ To prevent system breakdowns and
vehicle fire
Observe the following precautions.
Failure to do so may cause damage to
the vehicle, and possibly a fire or injury.
● Never use a fuse of a higher amperage
rating than that indicated, or use any
other object in place of a fuse.
● Always use a genuine Lexus fuse or
equivalent.
Never replace a fuse with a wire, even
as a temporary fix.
● Do not modify the fuses or fuse boxes.
To Next Page
Loading...
