41
2-1. Basic information before operation
2
Basic function
Characters can be entered by hand
writing.
Write the characters to be entered.
Select the candidate character that
corresponds to the entered hand
written character.
Select the candidate character that
is displayed to enter the next
desired character.
Depending on the input screen and
conditions, the following operations
can be performed.
• Back space: Draw a straight line from
the bottom right to the bottom left.
• Space: Draw a straight line from the bot-
tom left to the bottom right.
• Line Break: Draw a line from the top
right to the bottom right and then con-
tinue to the bottom left at a right angle.
● To deselect the handwriting input range,
press the touchpad of the Remote Touch
or sub function button.
The list screen may be displayed after
entering characters. When a list is dis-
played, use the appropriate screen
button to scroll through the list.
Select this part to scroll the list by
operating the scroll bar.
To release scrolling the list, select
the scroll bar again.
Select to scroll the list.
● With navigation function: Matching items
from the database are listed even if the
entered address or name is incomplete.
● With navigation function: The list will be
displayed automatically if the maximum
number of characters is entered or
matching items can be displayed on a sin-
gle list screen.
● With navigation function: The number of
matching items is shown on the right side
of the screen. If the number of matching
items is more than 999, the system dis-
plays “***” on the screen.
● With navigation function: It can be per-
formed even if the “Map Flick” is set to
“Off”. (P.113)
Hand writing method
List screen
Scrolling list screen
To Next Page
Loading...
