1000i Series IP Phone (SMB)
User Guide Issue 1.0
12
7) Remove, reverse and re-install the handset hook so that the hook catches the groove in the
handset receiver.
8) Hang the handset up on the handset hook.
9) Complete all wiring connections as described in “1.6 1000i Installation” section.
NOTE
It may be necessary to remove the phone and tighten or loosen the screws for a secure mounting.
1.9 EHS Adaptor
Electronic Hook Switch (EHS) Adaptor is a device which electronically connects a EHS Base Set and
Ericsson-LG Enterprise phone. This EHS Adaptor enables remote control with the compatible EHS Base Set
and the 1000i Series (except 1010i).
1.9.1 Compatible EHS Base Set Model List
Below are the recommended EHS Base Set models for your phone. For further information on installation see
the EHS Adaptor Quick Installation Guide which is packed with it.
Jabra (IQ Protocol): PRO P20, PRO 925, PRO 9450
Plantronics (PSB Protocol): Savi W720, Savi W740-M, CS540
Sennheiser (DHSG Protocol): D10, DW Pro
NOTE
Ericsson-LG Enterprise cannot guarantee other model except the above list and this list will be updated if we
have finished testing the new one anytime.
To Next Page
