LG-Ericsson iPecs 1010i - 6 Send & Retrieve Messages

1000i Series IP Phone (SMB)
User Guide Issue 1.0
37
6 Send & Retrieve Messages
6.1 Responding to a Station Message Waiting Indication
Another station can leave a Station Message Waiting indication (MWI) to request a callback when you do not
answer or your phone is in the DND mode. The message icon will display on your LCD screen. If programmed,
a flashing MSG LED on the iPECS Phone also indicates when there is a Message Waiting. As a further
notification, you may receive a periodic Message Wait Reminder Tone. You may review and delete messages
as well as respond with a callback.
To review your Station messages:
1) Press the MSG button, the LCD shows the Message Summary display.
1. INTERNAL CALL BACK (002)
2. MISSED CALL (000)
3. VOICE MAIL (002)
4. SMS (00)
BACK OK
2) Dial 1 (Internal Call Back List) to view message waits from other stations.
3) Press the navigation up/down button to scroll through your ICM messages.
To return a call from the list of ICM MWIs:
1) Press the navigation up/down buttons to scroll through the Intercom messages.
2) Press the OK Softkey (for 1010i / 1020i) or OK button to select and place the return call.