1000i Series IP Phone (SMB)
User Guide Issue 1.0
55
10 Features & Flexible Buttons
10.1 Entering Station Program Data
A special code set is available for iPECS Phone users to assign certain attributes such as Authorization Codes
(Passwords). After entering the User Program mode, you dial the codes to select the attribute and setting.
Once selected, the setting is saved.
A list of the User Program codes, the feature/function and inputs required are available from your system
administrator.
In some cases, you can assign these codes to a flexible button.
To assign user programmable attributes to your station:
1) Press the Transfer (PGM) button.
2) Dial desired User Program codes. (Refer to “Appendix A: User Program Code”.)
3) Press the HOLD(SAVE) button.
10.2 Assigning Features to Flexible Buttons
You may assign features and functions to the flexible buttons on your iPECS Phone, and may be able to
assign outside line buttons.
Flexible buttons may be assigned for most features providing One-Touch feature activation. For example, a
flexible button may be assigned to access the Account Code feature and may include the Account code digits.
Features that may be assigned to a flexible button include.
DSS/BLF—Enter station number.
Speed Dial—Enter Station/System Speed dial bin.
Flex Numbering Plan—Enter Flex Numbering Plan code (contact to your system administrator).
User Program Code—Press the Transfer (PGM) and enter a User Program code (contact to your
system administrator).
Outside Line—Enter the line or group number.
To assign a feature to a Flex button:
1) Press the Transfer (PGM) button.
2) Press the desired flexible button.
In case of Station number, outside line or line group, enter the number then press the HOLD(SAVE)
button.
In case of Flexible Numbering Plan Code, enter the numbering plan code then press the HOLD(SAVE)
button.
In case of a User Program Code, press the Transfer (PGM) button and enter the Program Code then
press the HOLD(SAVE) button.
To Next Page
Loading...
