LG-Ericsson iPecs 1010i - Disable Dialing from Your Phone; Temporarily Override Dialing Restrictions at a Phone

1000i Series IP Phone (SMB)
User Guide Issue 1.0
29
4.2.4 Disable dialing from your phone
You can temporarily ‘Lock’ your phone by activating Temporary COS; the phone is not allowed to place outside
calling, except emergency calls. To deactivate Temporary COS you must enter your Authorization code.
To activate Temporary COS:
1) Press the Transfer (PGM) button.
2) Dial 21 (User Program code for UCP/eMG). '21' is the Code that activates the Temp COS (Class of
Service).
3) Press the HOLD(SAVE) button.
To deactivate Temporary COS:
1) Press the Transfer (PGM) button.
2) Dial 22 (User Program code for UCP/eMG). '21' is the Code that deactivates the Temp COS (Class
of Service).
3) Dial your Authorization code (station number and password).
4) Press the HOLD(SAVE) button.
4.2.5 Temporarily override dialing restrictions at a phone
Override the dialing restrictions at any phone by activating Walking COS. When active, Walking COS applies
the Class of Service of your Authorization for a call. Note that you must activate Walking COS for each call you
make.
To activate Walking COS:
1) Press the Transfer (PGM) button.
2) Dial 23 (User Program code for UCP/eMG). '23' is the Code that deactivates the Walking COS
(Class of Service).
3) Dial your Authorization Code (station number and password).
4) Place call as normal.