LG-Ericsson iPecs 1010i - 7 Remote System Access; 7.1 Mobile Phone Extension

1000i Series IP Phone (SMB)
User Guide Issue 1.0
40
7 Remote System Access
7.1 Mobile Phone Extension
When away from your desk or office you can place and receive iPECS calls on your mobile phone. You may
need to activate the Mobile Phone Extension feature and register the Mobile Phone number.
To register a mobile phone number:
1) Press the Transfer (PGM) button.
2) Dial 37 (Register Mobile number code for UCP/eMG), '37' is the Code that access the Register
Mobile Phone number.
3) Dial your mobile phone number.
4) Press the HOLD(SAVE) button.
To activate Mobile Phone Extension for your registered mobile phone:
1) Press the Transfer (PGM) button.
2) Dial 38 (Mobile Extension activation code for UCP/eMG), '37' is the Code that activate the Mobile
Phone Extension feature.
3) Dial 1 to activate or 0 to deactivate.
4) Press the HOLD(SAVE) button.
To place a call from the mobile extension using the iPECS System:
1) Dial the DID phone number of your station; the system will check the Caller ID, answer the call and
return intercom dial tone.
2) Place internal or external iPECS calls as normal.
3) Answer a call ringing at your mobile phone, the Station shows the “IN USE AT MOBILE EXT” on the
LCD screen.
To Transfer a call from the mobile extension using the iPECS:
1) Dial “*” while on an iPECS call.
2) Dial the desired station, the call is transferred and the mobile phone returns to idle.
3) Reconnect to the transfer by dialing #.
NOTE
This feature is only available when the DID number is serviced by an ISDN or SIP outside line. Check with
your system administrator to determine if the Mobile Extension feature is available to you.