What to do if the location of a touch does not correspond to the touch coordinates on LG 84WT70PS?
If the touch location doesn't match the touch coordinates on your LG Digital Signage, especially in Windows 7, calibrate the touch screen. Go to Control Panel > Hardware and Sound > Tablet PC Settings > Display > Display options > Calibrate or Reset.
Why does after-image appear on my LG Digital Signage?
If an after-image appears on your LG Digital Signage, it might be because a fixed image has been displayed for an extended period, potentially damaging the pixels. To prevent this, use the screen-saver function.
What to do if touch response is not working on LG 84WT70PS?
If you are experiencing problems with touch response on your LG Digital Signage, begin by checking the USB cable connection between your PC and the monitor. Ensure it is firmly connected. Also, verify the connection in Windows 7 / 8.x under Control Panel > System and Security > System, and check the number of touch-points supported under Pen and Touch. Ensure your PC's power cord is firmly plugged into a power outlet and that the monitor is powered on. If the screen is on, restart your PC to resolve potential network instability issues. Finally, if using Windows 7 / 8.x, calibrate or reset the touch screen via Control Panel > Hardware and Sound > Tablet PC Settings > Display > Display options. If you are using multiple monitors, set the monitor as the default monitor via Control Panel > Di...
What to do if my LG Touchscreen displays no image?
If your LG Touchscreen is not displaying an image, check the following: * Ensure the power cord is properly connected to the outlet. * Verify the power switch is turned on. * Adjust the brightness and contrast settings. * If the product is in power saving mode, move the mouse or press any key. Also, try turning both devices off and then back on. * Check the signal cable between the PC and the product, and press the INPUT menu on the remote control to check the input signal. * If the signal from the PC (video card) is out of the vertical or horizontal frequency range of the product, adjust the frequency range by referring to the Specifications in this manual.
How to fix no sound on LG Monitor?
If there is no sound from your LG Monitor, check if the audio cable is properly connected. Also, adjust the volume and ensure the sound settings are configured correctly.
How to increase sound volume on LG Monitor?
If the sound from your LG Monitor is too low, adjust the volume.
How to adjust sound that is too dull on LG Monitor?
If the sound from your LG Monitor is too dull, adjust the Clear Voice II, Treble, and Bass settings appropriately.
How to fix no image on LG 84WT70PS?
If your LG Digital Signage displays no image, first ensure the power cord is properly connected to the outlet and the power switch is turned on. If that doesn't work, try adjusting the brightness and contrast. If the product is in power saving mode, move the mouse or press any key. Try turning both devices off and then back on. Also, check the signal cable between the PC and the product, and press the INPUT menu on the remote to check the input signal. The signal from the PC (video card) might be out of the vertical or horizontal frequency range; adjust the frequency range by referring to the Specifications in this manual. If problems persist, the backlight may need repair.
Why does the screen image look abnormal on my LG 84WT70PS Digital Signage?
If the screen image on your LG Digital Signage looks abnormal when using a D-Sub analog signal, press the "AUTO" button on the remote control to automatically select the optimal screen status. If the adjustment isn't satisfactory, navigate to [PICTURE] - [Screen] - [Position], [Size] or [Phase] in the OSD menu. Also, ensure that the video card resolution and frequency are supported by the product. If the frequency is out of range, set it to the recommended resolution in the Control Panel "Display" settings. Finally, make sure the proper input signal is connected to the signal port by using a matching signal cable.
How to troubleshoot audio not working on LG Digital Signage?
If the audio function on your LG Digital Signage isn't working, start by checking if the audio cable is connected properly. Then, adjust the volume and ensure the sound is set correctly. You may also need to adjust the Clear Voice ll, Treble, and Bass settings appropriately.
Identifies physical parts and buttons on the monitor and its connection panel for user reference.
Guidelines and safety precautions for properly mounting the monitor on a wall.
Explains how to connect a PC to the monitor, including the Plug & Play feature.
Guide to connecting USB devices (HDD, memory) to play media files.
How to adjust picture settings like mode, energy saving, and aspect ratio for optimal viewing.
How to adjust sound settings like mode, virtual surround, clear voice, and AV sync.
How to configure network connection, check status, and enable display sharing.
Steps to connect and enable touch screen functionality with compatible Windows operating systems.
Solutions for issues where no image appears on the screen, checking connections and power.
Solutions for various screen image abnormalities like incorrect position, noise, or blurriness.
Troubleshooting steps for issues related to no sound or poor audio quality.
Solutions for abnormal screen color, instability, or pixel issues.
Troubleshooting for general operational issues, such as sudden power off or unresponsiveness.
Comprehensive guide to resolving issues related to touch screen input and calibration.
Solutions for problems encountered when using the Display Sharing feature.
Comprehensive list of commands, their codes, and data ranges for product control via RS-232C.
Explains the command transmission format and acknowledgement protocols for product control.
General| Screen Size | 84 inches |
|---|---|
| Contrast Ratio | 1200:1 |
| Viewing Angle | 178°/178° |
| Panel Type | IPS |
| Display Type | LED |
| Response Time | 8 ms |
| External Control | RS-232C, LAN |
| Orientation | Landscape / Portrait |
| Operating Temperature | 0°C to 40°C |
| Operating System | WebOS |
| RAM | 2 GB |
| Resolution | 3840 x 2160 |
| Brightness | 500 cd/m² |
| Input | HDMI, DisplayPort |
| Output | Audio Out |
| Power Supply | 100-240V~, 50/60Hz |
| Processor | Quad Core |
| Ports | USB, HDMI, DisplayPort, RS-232C, LAN |
| Power Consumption | 450W |
To Next Page
