LG BC775 - Page 45

45
CUSTOMIZING SETTINGS
Item Description
Skin Color Detects the skin area in the image and adjusts it to achieve natural
skin color.
Sky Color Adjusts only the color of the sky.
Grass Color Adjusts only the natural color area of, for example, elds and moun-
tains.
Gamma Adjusts the overall color of the screen to suit your preference.
In Expert and Cinema mode, you can customize the options of each
mode.
Color Gamut Selects the range of colors to display.
Edge
Enhancer
Provides much sharper and clearer edges to the picture.
Color Filter Accurately adjusts color and tint by ltering a specic color
area of RGB space.
Color
Temperature
Gamma: Select 1.9, 2.2, or 2.4.
a. Method: 2 points
- Pattern: Inner, Outer
- Points: Low, High
- Red/Green/Blue: The adjustment range is -50 - +50.
- Apply to all inputs: The values of the Color Temperature is applied
to all the input modes.
b. Method: 10 points IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit that indicates the size
of the video signal and can be set as either 10, 20, 30 - 90, or 100.
You can ne-tune for each setting as shown below.
- Luminance: If you set up luminance for 100 IRE, a luminance value
satisfying each gamma is automatically calculated for each step
from 10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50.
- Apply to all inputs: The values of the Color Temperature is applied
to all the input modes.
Color
Management
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta colors. Allows an
expert to adjust the tint using a test pattern. Six colors (Red/Green/
Blue/Cyan/Magenta/Yellow) can be selectively adjusted without
affecting other colors. You may not see colors change on a normal
picture even after adjustment.
- Chroma Red/Green/Blue/Yellow/Cyan/Magenta,
Tone Red/Green/Blue/Yellow/Cyan,
Magenta: The adjustment range is -30 - +30 each.
* Available options may differ depending on the input signal or video mode, etc.