LG BC775 - Page 64

64
Serial Communication Function
08. Sharpness (Command: kk)
 Adjusts the sharpness.
Disabled when Black Mode is selected.
Transmission
[k][k][][Set ID][][Data][Cr]
Data Min: 0H - Max: 32H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[k][][Set ID][][OK][Data][x]
Data Min: 0H - Max: 32H
10. Key Lock (Command: km)
 To Set the function of locking the remote
control and front panel control on the
projector.
Transmission
[k][m][][Set ID][][Data][Cr]
Data 00 : Disables the key lock.
01 : Enables the key lock.
Ack
[m][] [Set ID][][OK][Data][x]
Data 00 : Disables the key lock.
01 : Enables the key lock.
* This function is configured when the keys on
theremote control or control panel are not
used. If the unit is fully discharged after its
power plugis pulled out of a wall outlet, the
LOCK function is cleared.
* If the unit is in the key lock standby mode, the
projector will not respond to the power button
on the remote control or control panel..
11. Color Temperature (Command: ku)
 Adjusts the color temperature value.
Disabled when Black Mode is selected.
Transmission
[k][u][][Set ID][][Data][Cr]
Data 00: Medium 01: Cool
02: Warm 04: Natural
(* Transmitted in hexadecimal code)
*Data 03 is not used.
Ack
[u][][Set ID][][OK][Data][x]
Data 00: Medium 01: Cool
02: Warm 04: Natural
09. OSD Control (Command: kl)
 Selects OSD On/Off.
Transmission
[k][l][][Set ID][][Data][Cr]
Data 00: OSD selection mode off
01: OSD selection mode on
Ack
[l][][Set ID][][OK][Data][x]
Data 00: OSD selection mode off
01: OSD selection mode on